|Stock sizes:||0.91m x 0.91m|
The WizFloor modular comfort is a collection of high performance 0.91m x 0.91m interconnecting rubber anti-fatigue mats. These resilient modular mats are tough enough to handle 24 hour shift operations, but supple enough to provide cushioned support where needed. Due to the modularity, these tiles can be positioned to cover large flooring areas, single workstations and assembly lines.
For additional safety, we recommend purchasing and connecting the optional beveled yellow safety edges.
Available in 3 different rubber compounds based on environmental exposures:
|Stock sizes:||0.91m x 0.91m|
The WizFloor Anti Fatigue product range is available with a standard range of bevelled straight edge ramps and corner pieces.
|Bleach Solution (10% Dilute)||NT||B||B||C||C||C|
|Brake Fluid (Silicone Based)||U||A||B||A||B||B|
|Chlorine Solution (3% Dilute)||C||A||B||C||C||C|
|Cutting Fluid (Mineral Oil Based)||U||B||B||B||C||D|
|Hydraulic Oil (Petroleum)||U||A||B||D||D||D|
|Hydrochloric Acid Cole (37% Dilute)||U||C||C||B||B||B|
|Lindol (Hydraulic Fluid)||NT||U||NT||U||U||U|
|Transmission Fluid (Type A)||U||B||A||C||U||U|
A: GR stands for Grease Resistant.
A: The GR compound is best suited for areas with water and dry debris. It is also resistant to boric acid & ethylene glycol.
A: CFR stands for Cutting Fluid Resistant.
A: The CFR compound is resistant to mineral oil-based fluids. It is also resistant to silicone-based brake fluid, boric acid & ethylene glycol.
A: NBR stands for Nitrile Rubber.
A: The NBR compound is resistant to silicone-based brake fluid, boric acid, ethylene glycol, animal fats, brake fluid, chlorine solution, diesel oil, petroleum-based hydraulic oil, salt water and vegetable oil.
A: Yes, 3″ edging is available in both yellow and black. Edging comes in both male and female to correspond with the male or female side of the mat. Edging comes in 3″ wide by 39″ long strips.
A: Yes, the mats can be placed in both wet and dry environments.
A: Use a high-pressure hose (not to exceed 500 psi) and hot water (max 160o F) to rid the mats of oils. For best results use a mild soap or detergent with a pH between 4 and 9, to clean the mats. Do not use steam (unless specifically recommended), degreasers, or caustic chemicals. Do not machine wash or mechanically scrub the mats.
A: Yes we can. We offer 3 types of customisation:
A: No, because monitors vary so there may be a slight variance in the colour. If colour choice is critical, we suggest that you order a sample. Due to manufacturing processes and material dye lots, colour can vary, but our products fall within an industry-standard acceptable variation.
A: The modular mats are available with 3″ edging in yellow and black. The ramps allow for a smooth transition on and off the mat and do not pose a tripping hazard.
A: Yes! Unfortunately, that rubbery smell is a feature of any rubber product. The mat should lose that smell over time. If you are planning to install rubber mats or flooring in any enclosed space, please remember that this can slow the dissipation of a strong rubber scent.